LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Avalanche 2500 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Blower Replacement - Cupholder - Front Floor Console >> Installation Procedure

Installation Procedure

  1. Install the connector (2).
  2. Slide the blower assembly down.
  3. Install the blower assembly.
    4. Fig 1: Installing Connector
    GM1410119Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the 2 retaining screws.

    Tighten:  Tighten the screws to 7 N.m (62 lb in).

    5. Fig 2: Installing Blower Assembly Retaining Screws
    GM1410123Courtesy of GENERAL MOTORS CORP.
  5. Install the console cup holder assembly. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear)  or Cupholder Replacement (Platinum) .
scientia non olet · About LEMON Manuals