LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Installation Procedure

Installation Procedure

  1. Install the IP accessory trim plate to the instrument panel.
  2. Connect the electrical connectors, if equipped.
  3. Align the upper tabs of the IP accessory trim plate to the instrument panel.
  4. Install the following sets of screws:
    • Two screws tot he front of the trim panel
    • Two screws to the bottom of the trim panel
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Tighten all of the screws.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  6. Install the console storage box, if required.
  7. Install the ashtray or the cupholder, if required.
  8. Close the ashtray or the cupholder.
    Fig 1: Installing Instrument Panel Accessory Trim Plate To Instrument Panel
    G01534509Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals