LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Trim Panel Replacement - Instrument Panel (I/P) Cluster >> Installation Procedure

Installation Procedure

  1. Position the IP cluster trim plate to the instrument panel.
  2. Align the IP cluster trim plate clips to the slots in the instrument panel.
  3. Push the IP cluster trim plate clips into the slots in the instrument panel until fully seated.
  4. Reposition the steering column to the original position.
  5. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT  .
  6. Install the IP insulator. Refer to one of the following procedures:
  7. Install the IP accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY  .
    Fig 1: Installing Instrument Panel Cluster Trim Plate To Instrument Panel
    G01534511Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals