LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Trim Pad Replacement - Instrument Panel (I/P) Upper >> Installation Procedure

Installation Procedure

  1. Align the locating pins and the retainers from the upper trim panel to the slots in the IP.
  2. Install the DRL ambient light sensor. Refer to DAYTIME RUNNING LAMPS (DRL) AMBIENT LIGHT SENSOR REPLACEMENT in Lighting Systems.
  3. If equipped, install the sun load sensor.
    Fig 1: Installing Sun Load Sensor
    G01534522Courtesy of GENERAL MOTORS CORP.
  4. Push forward and down on the upper trim panel to lock into place.
  5. Install the windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR in Interior Trim.
    Fig 2: Installing Instrument Panel Upper Trim Panel And Pushing Retainers
    G01534523Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals