LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Instrument Panel (I/P) Multifunction Switch Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (IP) accessory trim plate. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER 
    Fig 1: Identifying Instrument Panel
    G01534489Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts/screws from the IP switch bank.
  3. Remove the switch bank by pulling straight out from the IP.
    Fig 2: Removing Switch Bank From Instrument Panel
    G01534490Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
    Fig 3: Disconnecting Electrical Connectors
    G01534491Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals