LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Instrument Panel (I/P) Harness Replacement >> Installation Procedure

Installation Procedure

  1. Align the wiring harness retainers.
  2. Push in on the wiring harness (2) until the harness is secure.

    Important:  Ensure that the electrical connectors are routed correctly through the instrument panel.

  3. Install the instrument panel. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT  .
    Fig 1: Installing Instrument Panel Wiring Harness
    G01534550Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals