LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Driver Information Center Replacement >> Installation Procedure

Installation Procedure

  1. Install the driver information display to overhead console.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the driver information display to overhead console screws.

    Tighten 

    Tighten the screws to 1 N.m (9 lb in).

  3. Install the overhead console. Refer to CONSOLE REPLACEMENT -- OVERHEAD (SINGLE) or CONSOLE REPLACEMENT -- OVERHEAD (DUAL) or CONSOLE REPLACEMENT -- OVERHEAD (CF5) in Interior Trim.
  4. Calibrate the compass. Refer to ELECTRONIC COMPASS CALIBRATION   . 
    Fig 1: Installing Driver Information Display To Overhead Console
    G01534525Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals