Removal Procedure

Remove the push-in retainers from the IP insulator to instrument panel.
Remove the press-on retainers from the IP insulator to dash mat.

Fig 1: Removing Press-On Retainers From IP Insulator To Dash Mat (Left)
Courtesy of GENERAL MOTORS CORP.
Unsnap the IP courtesy lamp from the IP insulator.

Fig 2: Removing IP Courtesy Lamp From IP Insulator (Left)
Courtesy of GENERAL MOTORS CORP.
Remove the IP insulator from the instrument panel.

Fig 3: Removing IP Insulator From Instrument Panel (Left)
Courtesy of GENERAL MOTORS CORP.