LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instruction >> Bracket Replacement - Console Floor >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the bolts to the floor console bracket.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 1: Installing Bolts To Floor Console Bracket
    G01534544Courtesy of GENERAL MOTORS CORP.
  2. Slide the floor console and install the screws to the floor console bracket assembly.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  3. Install the DVD player. Refer to DVD PLAYER REPLACEMENT in Entertainment.
  4. Install the bezel to the floor console. Refer to POWER ACCESSORY PORT REPLACE - FRONT FLOOR CONSOLE  .
    Fig 2: Installing Screws To Floor Console Bracket Assembly And Tightening
    G01534545Courtesy of GENERAL MOTORS CORP.