LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture LT, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Drum Brake Backing Plate >> Removal

Drum Brake Backing Plate: Removal

  1. Raise and support the vehicle. Remove the tire and wheel. Remove the brake drum. See BRAKE DRUM  . Remove the brake shoes. See BRAKE SHOES  . Remove the universal spring.
  2. Remove the wheel cylinder. See WHEEL CYLINDER  . Disconnect the parking brake cable from the backing plate. Remove the rear wheel hub. Remove the backing plate.
scientia non olet · About LEMON Manuals