LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Switch >> Installation

Park Brake Switch: Installation

  1. Install park brake switch. Install the screw in order to retain the switch to the lever assembly.
  2. Connect the park brake switch connector. Position the console over the shift knob.
  3. If the vehicle has an auxiliary power outlet, connect the auxiliary power outlet connector.
  4. If the vehicle has an automatic transmission, connect the power mode selector switch connector.
  5. Install the console. Secure with 4 screws (1,3,4,6) and 2 clips (2,5). See Figure .
scientia non olet · About LEMON Manuals