LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Removal

Master Cylinder Reservoir: Removal

  1. Disconnect the reservoir fluid level connector. See Figure . Clean the outside of the reservoir.
  2. Remove the reservoir cap. Remove the reservoir diaphragm. Remove the fluid with a syringe.
  3. Remove the screw or the reservoir pin using a drift. See Figure . Remove the reservoir. Remove the reservoir grommets.