LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Calipers >> Removal

Disc Brake Calipers: Removal

  1. Remove 2/3 of the brake fluid from the master cylinder reservoir using a siphon or the equivalent.
  2. Raise and support the vehicle. Remove the tire and wheel assembly. Place a container below the brake hose in order to catch escaping brake fluid.
  3. Remove the front brake hose fitting and the 2 washers from the caliper.
  4. Remove the 2 caliper guide pin bolts. Remove the caliper from the bracket.
scientia non olet · About LEMON Manuals