LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments & Inspections >> Stoplight Switch Adjustment

Stoplight Switch Adjustment

  1. Pull up the brake pedal and hold the pedal in this position.
  2. Adjust the stoplight switch as follows: The clearance between the end of the thread and the brake pedal stopper should be 0.06-0.08 in (1.5-2.0 mm).
  3. Tighten the lock nut to 66.4 INCH lbs (7.5 N.m).
scientia non olet · About LEMON Manuals