LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Bleeding Brake System >> Master Cylinder Bench Bleeding

Master Cylinder Bench Bleeding

  1. Install the reservoir to the master cylinder. See MASTER CYLINDER RESERVOIR  under REMOVAL & INSTALLATION.
  2. Fill the master cylinder reservoir with brake fluid and keep full throughout the entire bleeding process. Install adapters into each master cylinder outlet port.
  3. Attach a piece of plastic tubing to each adapter and submerge the other ends in the reservoir. Ensure the tubes remain submerged in the fluid. Using a wooden or plastic dowel, slowly push in the master cylinder piston and release. Repeat the process until there is no sign of air in the brake fluid.
scientia non olet · About LEMON Manuals