LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Symptom Testing >> Park Brake Will Not Hold Or Release

Park Brake Will Not Hold Or Release

  1. Were you sent here from the Park Brake Symptom Table? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT - PARK BRAKE  .
  2. Inspect the park brake system for proper operation. See PARK BRAKE SYSTEM TESTING  under SYSTEM TESTING. Did you find and correct a condition? If so, go to step  6 . If not, go to next step.
  3. Inspect the drum brake system for proper operation. See DRUM BRAKE SYSTEM TESTING  under SYSTEM TESTING. Did you find and correct a condition? If so, go to step  6 . If not, go to next step.
  4. Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM TESTING  under SYSTEM TESTING. Did you find and correct a condition? If so, go to step  6 . If not, go to next step.
  5. Inspect the hydraulic brake system for proper operation. See HYDRAULIC BRAKE SYSTEM TESTING  under SYSTEM TESTING. Did you find and correct a condition? If so, go to next step. If not, go to DIAGNOSTIC STARTING POINT - PARK BRAKE  under SYSTEM TESTING.
  6. Road test the vehicle in order to confirm proper operation. See HYDRAULIC BRAKE SYSTEM ROAD TEST  under TROUBLE SHOOTING. Is the condition still present? If so, go to step  2 . If not, then system is okay.