LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Switch >> Removal

Park Brake Switch: Removal

  1. Verify the park brake lever is in the released position. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift up the console. See Figure .
  2. If the vehicle has an automatic transmission, disconnect the power mode selector switch connector.
  3. If the vehicle has an auxiliary power outlet, disconnect the auxiliary power outlet connector.
  4. Disconnect the park brake switch connector.
  5. Remove the screw and the park brake switch.
scientia non olet · About LEMON Manuals