LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Lever Assembly >> Removal

Park Brake Lever Assembly: Removal

  1. Verify the park brake lever is in the released position. Remove the 4 screws (1,3,4,6), the 2 clips (2,5), and lift up the console. See Figure . If the vehicle has an automatic transmission, disconnect the power mode selector switch connector. If the vehicle has an auxiliary power outlet, disconnect the auxiliary power outlet connector.
  2. Disconnect the park brake switch connector.
  3. Remove the park brake cable lock nut. See Figure . Remove the park brake lever bolts and the park brake lever from the equalizer. See Figure . Remove the pin and the equalizer from the park brake cable.
scientia non olet · About LEMON Manuals