LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Caliper Brackets >> Removal & Installation

Removal & Installation

  1. Remove the brake pads and hardware. See DISC BRAKE PADS  .
  2. Remove the 2 mounting bolts and caliper brackets from the vehicle. Remove the 2 caliper pins and the 2 boots from the caliper bracket.
  3. Install the 2 boots to the caliper bracket. Apply disc brake caliper lubricant to the slide pins. Install the slide pins to the caliper bracket.
  4. Install the caliper bracket to the vehicle. Install the 2 mounting bolts, and tighten to specifications. See TORQUE SPECIFICATIONS  .
  5. Install the brake pads and the hardware. See DISC BRAKE PADS  .
scientia non olet · About LEMON Manuals