LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hoses >> Removal (Front)

Removal (Front)

  1. Siphon brake fluid from the master cylinder reservoir.
  2. Raise and support the vehicle. Remove the front tire and wheel assembly.
  3. Clean any dirt and foreign material from the hose and fittings. Remove the front brake hose from the front brake pipe.
  4. Remove the following from the front strut:
    • The upper hose clip.
    • The lower hose clip.
    • The front brake hose.
  5. Remove the following from the brake caliper:
    • The brake hose bolt.
    • The 2 seal washers.
    • The brake hose.