LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Removal (Non-ABS)

Removal (Non-ABS)

  1. Remove the master cylinder assembly. See MASTER CYLINDER  .
  2. Disconnect the vacuum hose from the brake booster. Remove the clevis pin from the push rod clevis. See Fig 1 . Disconnect the push rod clevis from the brake pedal arm.
  3. Remove the 4 brake booster nuts. See Fig 2 . Remove the brake booster.
  4. For brake booster adjustments, see POWER BRAKE BOOSTER PISTON ROD ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
Fig 1: Identifying Power Brake Booster & Related Components
G00284636Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Brake Booster To Bulkhead
G00284640Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals