LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Drums >> Installation

Brake Drums: Installation

  1. Before installing the drum, measure the outer diameter of the brake shoes. The outer diameter should be as specified. See BRAKE SPECIFICATIONS  . If the outer diameter of the brake shoes is not within specifications, turn the adjuster in order to adjust the outer diameter of the shoes.
  2. Install the brake drum. Verify that the drum is free of dirt and oil.
  3. Install the locking washers to the wheel studs.
  4. Install the tire and wheel assembly. Lower the vehicle.
  5. Press the brake pedal 4 to 10 times with about 66 lbs. (30 kg) in order to obtain the proper drum to shoe clearance.
  6. Adjust the parking brake. See PARK BRAKE ADJUSTMENT  in PARK BRAKE SYSTEM under ADJUSTMENTS & INSPECTIONS.
  7. Install the console. Secure with 4 screws and 2 clips.
  8. Install the console. Install the 4 screws and 2 clips to console. See Figure .
scientia non olet · About LEMON Manuals