Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0200, P0220, P0300, P0442, P0446, P0452, P0453, P0455, P0496, P1125, P1258, P1514, P1515, P1516, P1518, P2108 or P2135 are not set.
The ECT sensor parameter is more than 122° F (50° C).
The ignition 1 signal parameter is between 10-18 volts.
The MAF sensor parameter is between 3-40 g/s.
The engine speed parameter is between 500-3000 RPM.
The engine run time parameter is more than 120 seconds.