Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0141, P0161, P0200, P0220, P0300, P0442, P0446, P0452, P0453, P0455, P0496, P1125, P1258, P1514, P1515, P1516, P1518, P2108 or P2135 are not set.
The engine run time is more than 300 seconds.
The loop status is closed.
The ignition 1 signal is between 10-18 volts.