DTC P0351-P0358: Ignition Control Circuit: Description

The ignition system on this engine uses an individual ignition coil for each cylinder. The Powertrain Control Module (PCM) controls the ignition system operation. The PCM controls each coil using one of 8 Ignition Control (IC) circuits. The PCM commands the IC circuit low when a spark event is requested. This causes the IC module to energize the ignition coil to create a spark at the spark plug. Each ignition coil has the following circuits:

• The Ignition Control (IC) circuit.
• The ignition 1 voltage circuit.
• A ground circuit.
• A reference low circuit.

The sequencing and timing are PCM controlled. This DTC sets when the IC circuit is out of range.