Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Align the cigarette lighter retainer to the slot in the cigarette lighter hole.
Courtesy of GENERAL MOTORS CORP.
- Install the cigarette lighter retainer. Press into place until the retainer is fully seated.
Courtesy of GENERAL MOTORS CORP.
- Connect the electrical connector to the front floor console cigarette lighter.
Courtesy of GENERAL MOTORS CORP.
- Align the cigarette lighter socket tabs to the retainer.
Courtesy of GENERAL MOTORS CORP.
- Install the cigarette lighter socket into the front floor console. Press the socket into place until fully seated.
- Install the cigarette lighter fuse.
- Inspect the cigarette lighter for proper operation.