LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Monte Carlo LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Cigar Lighter Housing Replacement - Instrument Panel (I/P) >> Removal Procedure

Removal Procedure

  1. Remove the cigarette lighter fuse.
  2. Fig 1: Removing Cigar Housing Using J 42059 (Instrument Panel)
    GM668003Courtesy of GENERAL MOTORS CORP.
  3. Remove the cigarette lighter socket by placing one side of the "T" portion of J 42059  into the tab window. See Special Tools . Place the other side angled into the opposite tab window. Pull the power accessory port socket straight out.
  4. Fig 2: Removing Cigar Housing Using Grinding Tool
    GM1120988Courtesy of GENERAL MOTORS CORP.
  5. If the standard method fails to remove the socket, use the following alternate method:
    1. Insert a small grinding tool with a cutoff wheel into the socket.
    2. Remove the plastic latches in the 3 mm (0.11 in) square windows.
    3. Use the J 42059  as directed above to remove the socket. See Special Tools .
  6. Remove the tool from the cigarette lighter socket.
  7. Fig 3: Cigar Lighter Electrical Connector (Instrument Panel)
    GM668035Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the electrical connector from the front floor console cigarette lighter.
  9. Fig 4: Removing Housing Retainer (Instrument Panel)
    GM668038Courtesy of GENERAL MOTORS CORP.
  10. Use your index finger in order to pull out the cigarette lighter retainer.