LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Drum >> Installation

Brake Drum: Installation

  1. Use the Hub Cleaning Kit (J-42450-A) to clean the hub.
  2. Clean the mating surface on the inside of the brake drum. Using the Rotor/Drum Flange Resurfacing Kit (J-41013).
  3. Install the brake drum. Align the marks made during the brake drum removal.
  4. Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS . Lower the vehicle.
scientia non olet · About LEMON Manuals