Test C: Braking Action Uneven (Pulls To One Side)
- If sent here from SYMPTOM INDEX table, go to next step. If not sent here from SYMPTOM INDEX table, perform HYDRAULIC BRAKE DIAGNOSTIC SYSTEM CHECK under TROUBLE SHOOTING.
- Inspect the suspension system for proper operation. See appropriate FRONT and REAR SUSPENSION articles in SUSPENSION. If problem was found and corrected, go to step 7. If problem was not found, go to next step.
- Inspect the steering system for proper operation. See appropriate STEERING article in STEERING. If problem was found and corrected, go to step 7. If problem was not found, go to next step.
- Inspect the hydraulic brake system for proper operation. See HYDRAULIC SYSTEM TEST under SYSTEM TESTS. If problem was found and corrected, go to step 7. If problem was not found, go to next step.
- Inspect the disc brake system for proper operation. See DISC BRAKE SYSTEM TEST under SYSTEM TESTS. If problem was found and corrected, go to step 7. If problem was not found, go to next step.
- Inspect the drum brake system for proper operation. See DRUM BRAKE SYSTEM TEST under SYSTEM TESTS. If problem was found and corrected, go to step 7. If problem was not found, go to next step.
- Road test the vehicle in order to confirm proper operation. See VEHICLE ROAD TEST under TROUBLE SHOOTING. If the problem is still present, go to step 2. If problem is not present, system is okay.