LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Wheel Cylinders >> Installation

Wheel Cylinders: Installation

  1. Apply LOCTITE(R) GM P/N 12345382, (Canadian P/N 10953489) or equivalent, to the wheel cylinder shoulder face that contacts the backing plate. Position the wheel cylinder to the backing plate.
  2. Install the wheel cylinder mounting bolts. Tighten the wheel cylinder mounting bolts to specification. See TORQUE SPECIFICATIONS .
  3. Remove the plugs from the brake pipe ends. Connect the brake pipe fitting to the wheel cylinder. Tighten the fitting to specification. See TORQUE SPECIFICATIONS .
  4. Install the bleeder valve. Tighten the valve to specification. See TORQUE SPECIFICATIONS .
  5. Install the brake shoes. See BRAKE SHOES .
  6. Adjust the drum brakes. See DRUM BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS. Install the brake drum. See BRAKE DRUM .
  7. Bleed the brake hydraulic system. See MANUAL BLEEDING  or PRESSURE BLEEDING  under BLEEDING, FILLING & FLUSHING BRAKE SYSTEM.
  8. Adjust the parking brake. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
  9. Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS . Lower the vehicle.
scientia non olet · About LEMON Manuals