LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Park Brake Cable (Left) >> Removal

Rear Park Brake Cable (Left): Removal

  1. Raise and support the vehicle. Disconnect the left rear park brake cable from the equalizer.
  2. Disconnect the cable from the bracket using the Parking Brake Cable Release Tool (J-37043).
  3. Remove the tire and wheel assembly. Remove the brake drums. See BRAKE DRUM . Remove the brake shoes. See BRAKE SHOES .
  4. Disconnect the cable from the park brake lever. See Figure. Remove the cable from the backing plate using the brake cable release tool.