LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Reservoir >> Removal

Master Cylinder Reservoir: Removal

  1. Remove the master cylinder. See MASTER CYLINDER . Remove the brake fluid level sensor from the reservoir.
  2. Secure the master cylinder in a vise. DO NOT clamp the master cylinder body, secure only at the flange.
  3. Carefully tap out the reservoir retaining pins. See Fig 1.
  4. Remove the reservoir from the master cylinder by pulling the reservoir straight up and away from the cylinder.
  5. Remove the seals from the master cylinder. See Fig 2.
Fig 1: Removing Reservoir Retaining Pins
G00305454Courtesy of GENERAL MOTORS CORP.
Fig 2: Exploded View Of Master Cylinder Reservoir Assembly
G00076357Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals