LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Malibu Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Drum >> Removal

Brake Drum: Removal

  1. Raise and support the vehicle. Remove the tire and wheel assembly. Index the relationship of the drum to the axle flange.
    NOTE: DO NOT pry against the splash shield or backing plate in attempt to free the drum. This will bend the splash shield or backing plate. A bent backing plate may cause brake chatter and/or pulsation.
  2. Remove the brake drum. Complete the following steps if difficulty is encountered when removing the brake drum:
    • Remove the retainer clips.
    • Verify that the parking brake is released.
    • Use a rubber mallet in order to tap gently on the outer rim of the drum and/or around the inner drum diameter by the spindle. DO NOT use excessive force, which may deform the drum.
scientia non olet · About LEMON Manuals