Bleeding, Filling & Flushing Brake System: Notes
WARNING:
Brake fluid may irritate eyes and skin. In case of contact, take the following actions:
- If eye contact occurs rinse thoroughly with water.
- If skin contact occurs wash with soap and water.
- If ingested consult a physician immediately.
CAUTION:
When filling the master cylinder, use only Delco Supreme 11(R), GM P/N 12377967, (Canadian P/N 992667) or equivalent DOT 3 brake fluid. DO NOT use a container which has been used for petroleum based fluids, or a container which is wet with water. Petroleum based fluids will cause swelling and distortion of rubber parts in the hydraulic brake system, and water will mix with brake fluid, lowering the boiling point. Keep all fluid containers capped to prevent contamination.
CAUTION:
Avoid spilling brake fluid onto painted surfaces, electrical connections, wiring, or cables. Brake fluid will damage painted surfaces and cause corrosion to electrical components. If any brake fluid comes in contact with painted surfaces, immediately flush the area with water. If any brake fluid comes in contact with electrical connections, wiring, or cables, use a clean shop cloth to wipe away the fluid.
NOTE:
Power steering fluid, engine oil, brake fluid, or any mineral based fluids cannot be mixed. If brake seals contact power steering fluid or steering seals contact brake fluid, seal damage will result.