LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Upper >> Removal Procedure

Removal Procedure

    Fig 1: I/P Upper Trim Plate Screw - Right
    GM658458Courtesy of GENERAL MOTORS CORP.
  1. Remove the right instrument panel (IP) fuse block access hole cover.
  2. Remove the screw from the right end of the IP upper trim plate.
    3. Fig 2: I/P Upper Trim Plate Screw - Left
    GM658394Courtesy of GENERAL MOTORS CORP.
  3. Adjust the IP cluster trim plate in order to access the screw at the left end of the IP upper trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala)  or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
  4. Remove the screw at the left end of the IP upper trim plate
  5. Remove the IP lower trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Lower .
    6. Fig 3: I/P Upper Trim Plate Screw - Lower Right
    GM658462Courtesy of GENERAL MOTORS CORP.
  6. Remove the screw from the lower right end of the IP upper trim plate.
    7. Fig 4: I/P Upper Trim Plate
    GM454276Courtesy of GENERAL MOTORS CORP.
  7. Start at the upper right and center of the trim plate. Pull rearward and work to the left in order to release the retainers. Remove the IP upper trim plate from the IP lower trim panel.
scientia non olet · About LEMON Manuals