LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Front Floor Console (Impala) >> Removal Procedure

Removal Procedure

    Fig 1: Front Floor Console Trim Plate (Impala)
    GM601593Courtesy of GENERAL MOTORS CORP.
  1. Apply the park brake.
  2. Shift the transaxle shift lever from Park to 2.
  3. Open the storage compartment door.
  4. Carefully pry the rear of the trim plate away from the front floor console.
  5. Pull the trim plate towards the rear of the vehicle in order to disengage the front of the trim plate.
  6. Disconnect the electrical connector at the rear of the front floor console trim plate.
  7. Rotate the trim plate 180 degrees. Lift the trim plate over the shift control handle.
  8. Disconnect the wiring harness retainers from the trim plate.
  9. Disconnect the ashtray lamp and the wiring harness.
  10. Disconnect the cigar lighter electrical connector.
  11. Remove the ashtray.
  12. Remove the front floor console trim plate.