LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Front Floor Console (Impala) >> Installation Procedure

Installation Procedure

    Fig 1: Front Floor Console Trim Plate (Impala)
    GM601593Courtesy of GENERAL MOTORS CORP.
  1. Install the ashtray.
  2. Connect the cigar lighter electrical connector.
  3. Install the ashtray lamp and the wiring harness.
  4. Connect the wiring harness retainers to the trim plate.
  5. Lower the trim plate over the shift control handle. Rotate the trim plate 180 degrees.
  6. Connect the electrical connector at the rear of the trim plate.
  7. Engage the trim plate. Ensure that the retainers are completely engaged.
  8. Close the storage compartment door.
  9. Shift the transaxle shift lever from 2 to Park.
  10. Release the park brake.
scientia non olet · About LEMON Manuals