LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment >> Installation Procedure

Installation Procedure

    Fig 1: I/P Compartment Door Latch & Components
    GM601569Courtesy of GENERAL MOTORS CORP.
  1. Insert the key into the lock cylinder.
  2. Align the lock cylinder in the same position used for removal.
  3. Install the lock cylinder to the door handle cylinder housing. Press into place until fully seated.
  4. Turn the key 1/4-turn counterclockwise in order to secure the lock cylinder retainer.
  5. Remove the key from the lock cylinder.
  6. Install the latch mechanism to the IP compartment door handle.
  7. Position the inner and the outer door panels together.
    8. NOTE: Refer to Fastener Notice in Cautions and Notices.
  8. Install the screws to the inner IP compartment door panel.

    Tighten:  Tighten the panel screws to 2 N.m (18 lb in).

  9. Inspect the lock cylinder for proper operation.
  10. Close the IP compartment door.
scientia non olet · About LEMON Manuals