LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Bracket Replacement - Right >> Removal Procedure

Removal Procedure

    Fig 1: Right Knee Bolster, Bracket & Bolts
    GM455173Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (IP) lower trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Lower (Impala)  or Instrument Panel (I/P) Trim Panel Replacement - Lower (Monte Carlo) .
  2. Reposition the right IP accessory wiring junction block.
  3. Disconnect the wiring harness retainers from the knee bolster bracket.
  4. Remove the bracket bolts from the IP passenger knee bolster.
  5. Remove the bracket from the IP passenger knee bolster.
scientia non olet · About LEMON Manuals