LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

    IMPORTANT: The ignition switch must be in the OFF position when removing the instrument cluster.
    Fig 1: I/P Cluster
    GM519478Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) cluster trim plate. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala)  or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) .
  2. Remove the instrument cluster screws.
  3. Pull the instrument cluster towards you and disconnect the electrical connector.
  4. Remove the instrument cluster from the I/P.
scientia non olet · About LEMON Manuals