Removal Procedure
- Remove the cigarette lighter fuse.
- Remove the cigarette lighter element.
Courtesy of GENERAL MOTORS CORP.
- Remove the cigarette lighter socket by placing one side of the T portion of J 42059
into the tab window. See Special Tools . Angle the other side of the tool into the opposite tab window. Pull the lighter socket straight out.
Courtesy of GENERAL MOTORS CORP.
- If the standard method fails to remove the socket, use the following alternate method:
- Insert a small grinding tool with a cutoff wheel into the socket.
- Remove the plastic latches in the 3 mm (0.11 in) square windows.
- Use the J 42059
as directed above to remove the socket. See Special Tools .
- Remove J 42059
from the lighter socket. See Special Tools .
Courtesy of GENERAL MOTORS CORP.
- Disconnect the electrical connector from the cigarette lighter socket.
Courtesy of GENERAL MOTORS CORP.
- Using your index finger, pull out the cigarette lighter retainer.