Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Position the cigarette lighter retainer to the slot into the cigarette lighter hole.
Courtesy of GENERAL MOTORS CORP.
- Install the cigarette lighter retainer. Press the retainer into place until fully seated.
Courtesy of GENERAL MOTORS CORP.
- Connect the electrical connector to the cigarette lighter socket.
Courtesy of GENERAL MOTORS CORP.
- Align the cigarette lighter socket tabs to the cigarette lighter retainer.
Courtesy of GENERAL MOTORS CORP.
- Press the cigarette lighter socket into place until fully seated.
- Install the cigarette lighter element.
- Install the cigarette lighter fuse.
- Inspect the IP lighter for proper operation.