LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

    Fig 1: Insulator At Accelerator Pedal Stud
    GM455211Courtesy of GENERAL MOTORS CORP.
  1. Install the insulator to the stud at the accelerator pedal.
    2. Fig 2: Left I/P Insulator Retainers
    GM519316Courtesy of GENERAL MOTORS CORP.
  2. Insert the courtesy lamp socket to the insulator opening. Rotate the socket clockwise.
  3. Install the insulator retainers to the lower I/P trim pad openings.
scientia non olet · About LEMON Manuals