LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Fig 1: Ambient Temperature Sensor & Electrical Connector
    GM551891Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the ambient temperature sensor that is located on the front radiator air baffle.
  4. Remove the ambient temperature sensor from the radiator air baffle.