LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Ambient Temperature Sensor & Electrical Connector
    GM551891Courtesy of GENERAL MOTORS CORP.
  1. Install the ambient temperature sensor to the radiator air baffle.
  2. Connect the electrical connector to the ambient temperature sensor.
  3. Lower the vehicle.
  4. Drive the vehicle at a speed of 32 km/h (20 mph) for approximately 1 1/2 minutes or at a speed of 72 km/h (45 mph) for approximately 1 minute in order to obtain the ambient update.
scientia non olet · About LEMON Manuals