LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Removal

Stoplight Switch: Removal

  1. Remove the lower I/P trim insulator screw. Remove the lower I/P trim insulator from the brake pedal bracket.
  2. Disconnect the electrical connections from the stop light switch. See Fig 1 . Rotate the stop light switch counterclockwise until the travel stop has been reached. Pull the stop light switch rearward. See Fig 1 .
  3. Remove the stop light switch from the brake pedal bracket. See Fig 1 .
Fig 1: Identifying Stoplight Switch Components
G00307643Courtesy of GENERAL MOTORS CORP.