LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Lever Assembly >> Removal

Park Brake Lever Assembly: Removal

  1. Remove the console. Release the tension from the park brake cable system. See DISABLING PARK BRAKE CABLE AUTOMATIC ADJUSTER  under ADJUSTMENTS & INSPECTIONS.
  2. Disconnect the electrical connector from the park brake warning lamp switch. See Fig 1
  3. Remove the front park brake cable end from the lever reel assembly. See Fig 1 .
  4. Using the Parking Brake Cable Release Tool, release the cable conduit end fitting from the lever assembly. See Fig 1 .
  5. Remove the transmission shift control assembly mounting nuts. See Fig 2 .
  6. Remove the park brake lever assembly rear mounting nut. Raise the shift control assembly just enough to allow the park brake lever assembly to be removed. See Fig 1 .
  7. Remove the console attachment bracket. Remove the lever assembly. See Fig 1 .
Fig 1: Identifying Park Brake Cable Components
G00307648Courtesy of GENERAL MOTORS CORP.
Fig 2: Identifying Shift Assembly Mounting Nuts
G00307583Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals