LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Drum Brake Hardware >> Installation

Drum Brake Hardware: Installation

  1. Install the universal spring to the brake backing plate.
  2. Position the hook end of the Brake Shoe Spanner and Spring Remover under the universal spring and lightly pull the universal spring end out, away from the hub, while installing the spring end into the shoe web hole.
  3. Position the hook end of the Brake Shoe Spanner and Spring Remover under the universal spring and lightly pull the universal spring end out, away from the hub, while installing the spring end into the shoe web hole.
  4. Install the brake drum. See BRAKE DRUM  .
  5. Install the tire and wheel assembly. Lower the vehicle.
scientia non olet · About LEMON Manuals