LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Hardware >> Removal

Disc Brake Hardware: Removal

  1. Remove the disc brake pads. See BRAKE PADS  .
  2. Remove the disc brake caliper bolts from the caliper assembly.
  3. Remove the caliper bushings from the brake caliper assembly, and discard the bushings.
  4. Inspect the caliper bushing bores in the caliper assembly. Remove any debris or corrosion from the bores.
  5. Inspect the bolts for rust, corrosion, and/or damage. If any of these conditions are present, replace the bolts.
scientia non olet · About LEMON Manuals