LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Cavalier Base, 4D Sedan, L61/KL6 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hoses >> Removal (Rear)

Removal (Rear)

  1. Raise and suitably support the vehicle. Remove the rear tire and wheel assembly.
  2. Clean all dirt and foreign material from the brake hoses and brake pipe fitting.
  3. Using a backup wrench on the hose fitting, disconnect the brake pipe fittings from the brake hose. Cap or plug the brake pipe fitting ends and the brake hose ends to prevent fluid loss and contamination.
  4. Remove the brake hose retaining clips and from the hose mounting brackets.
  5. Remove the hose from the hose mounting brackets.
scientia non olet · About LEMON Manuals